GHOST, by O.ERRE is the perfect solution to grant a proper mechanical ventilation in homes and business premises, in case of renovations and in all situations where a ducted system cannot be used due to space reasons.
It sanitises the air, prevents Mould and Bacteria whilst being easy to install into existing or new properties.
Ghost is easy to install and has a modern and sleek design. This means that the fan can blend seamlessly into any environment. It can be quickly installed on 160mm ducting. The airflow covers 60 m3/h both for air extraction and intake, thus ensuring an adequate ventilation also in high-sized rooms.
The alternate flow system ensures an indoor constant air quality
- Motor housing placed inside the wall behind the heat exchanger to make the product highly silent.
- High efficiency heat exchanger (up to 93%) made of ceramic material.
Made of long life, high quality finest materials, with elegant design. - Front cover in ABS. Tilting opening system of the front panel to prevent ingress of air when the fan is OFF.
- External grille made of ABS specifically designed to reduce the outside noise.
- Standard duct length 500mm. 700mm length available on request.
250mm minimum wall depth - 3mt maximum wall depth (2,5mt in case of 90° curve). - DC ball bearing motor impeller, brushless with electronic commutation.
- Long life and low energy consumption.
- Easy cleaning and maintenance.
- Double dust filter, washable and easy to access for maintenance operations.
- IPX4 protection degree.
- Led indicator for functions and filter cleaning.
- Humidity and twilight sensors (active and wireless versions).
- The last set function is saved and automatically restored in case of interruption of the power supply.
- Caps for pipe in case of future installation in the construction site.
- No condensation drainage required.
- Working Temperature Range: - 30°C + 50°C.
To accompany the Ghost 160, a new smaller capacity model of 30m3/h has been designed and manufactured to suit a 100dia Hole. The Ghost 100 shares the same Front Cover and External Grille, but a new motor design and smaller heat recovery core, resulting in a IPX4 unit suitable for a replacement of an existing through the wall 100dia Bathroom Extract Fan.